MTP/MPO Fiber Optic Patch cord

发布时间:2014-01-10浏览 985 次
MTP/MPO Fiber Optic Patch  cord

 

 
Feature:
> JIS C5982&IEC1754-7 Standard Compliant
> Mult-fiber termination of 4f, 8f, 12f & 24f fiber
> Precision Multifiber MT Ferrule
> Push-pull latching
> Male and Female connector type
> Bare&Ruggedized Ribbon and Mic round cable


Technical Specification

MTP/MPO Connector

Standard SM MT Ferrule Low Loss(Elite) Ferrule Standard MM MT Ferrule Low Loss MM MT Ferrule
Insertion Loss Typical (dB) 0.35  0.20  0.35  0.20
Maximun (dB) 0.75  0.35  0.75  0.35
Return Loss (dB) ≥65 for APC (8 Angle Polish) ≥20 for PC
  ≥50 for PC ---
Male/Female  (dB) Male: With Pins, Female: Without Pins
Exchangeability (dB) ≤0.3 (Connector Randomly)
Tensile Strength  (dB) ≤0.3 (Max 66N)
Vibration (dB) ≤0.3 (10 ~ 55Hz)
Temp.Range  (dB) ≤0.3 (-40 ~ 75°C, 42Cycles)



Ordering Information
MPO-male / APC /12F - FC /UPC / SM2.0/ L1 / LM / RC
      1           2       3       4      5      6      7     8      9    10


1   Connector TypeMPO-female , MPO-male
2   Endface APC , PC
3   Fiber Count 4,8,12,24 MT Fiber
4   Connector Type MPO-female , MPO-male , FC, SC, ST, MU, LC
5   Endface PC,UPC,APC
6   Fiber Mode SM=Single mode , MM=Multimode (50, 62.5, OM2, OM3, OM4)
7   Cable Diameter Φ0.9,Φ2.0
8   Branch Length L1=0.5,0.6,0.7......1.0meter,or as required
9   Cable Length L=1,2,3,4......meter,or as required
10 Cable Type RJ:Jacket Ribbon Cable , RB:Bare Ribbon Cable , RC:250um round cable